Matek h743 Flight Controller
Description
Matek h743 Flight Controller
If you have any questions regarding our products, use the Motionew Contact us page to consult our engineering team.
Specifications
FC Specifications
MCU | STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash |
IMU | V3:ICM42688-P(SPI1) & ICM42688-P(SPI4)Â |
V2:MPU6000(SPI1) & ICM42605(SPI4) | |
Baro | Infineon DPS310 (I2C2) |
OSD | Â AT7456E(SPI2) |
Blackbox | Â MicroSD card slot (SDIO) |
FC Firmware
ArduPilot | MATEKH743 |
INAV | MATEKH743 |
peripherals | 7x UARTs (1,2,3,4,6,7,8) with built-in inversion
13x PWM outputs (including “LED” pad) 2x I2C 1x CAN 6x ADC (VBAT, , Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout |
other options | USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch 5V/9V(12V) for Camera/VTX power switch High-precision Current Sense (90A continuous, 220A peak) Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) ADC VB2 voltage divider: 1K:20K Static power 160mA@5V |
Power
input voltage | 8~36V DC IN (3~8S LiPo) |
Current Sense? | 132A (INAV Scale 250, ArduPilot 40A/V) |
PDB/Current sense resistor? | 90A continuous, 132A burst |
BEC | 5V 2A for FC & Peripherals |
BEC Vx | 8A for servos, 5V/ 6V option |
LDO | 3.3V 200mA |
Battery Voltage Sensor | 1k:20k |
Physical
Dimensions | 54 x 36 x 13 mm |
Mounting | Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm |
Weight | 30g with USB extender |
Product contents
Documents
Please contact us for more information.
Henry Butler –
Produit conforme et expédition rapide!