Handheld Herelink HD Video Transmission and Control System
875.20 $
Out of stock
Description
Overview of Handheld Herelink HD
Handheld Herelink HD is an all-in-one solution that allows for the transmission of full HD video over long distances, including video, data, and radio control system. A 2.4GHz radio controller is equipped with a built-in screen that makes it possible to transmit video, data, and control information to your devices, and the transmission range is up to 20km. There is a latency of less than 110 milliseconds. It has a large 5.5″ screen that displays a multitude of control options such as live imaging, autopilot configuration through the native QGround control, and other GCS applications that run on the Mavlink platform.
Besides the 5-12v power input, the Air Unit also has a single UART port for the purpose of connecting to a flight controller or other Mavlink accessories. It includes both an Air Unit and a Radio Controller that were designed to connect directly to the Air Unit and the Radio Controller and had a powerful Pinecone S1 processor with 4 cores, and 4 additional cores, at 1.4GHz, which allow for a lot of potential for development in the future.
key feature of Herelink HD Video
- All in one: Telemetry, Video, and Control
- 2.4Ghz frequency
- Up to 20KM in FCC mode and 12KM in CE mode
- UART Telemetry
- RC Protocol: SBUS, iBUS, ETC.
- Mavlink compatible
- Touch screen
- 2 HDMI inputs for 1080P@60fps video transmission
- APP QGround control, and API for development
- WIFI, Bluetooth and USB to connect with other devices
For a comprehensive reading of related products, please visit the Motionew website.
Specifications
Ground & Air Unit
SOC | ARM Cortex A53 4 core 2.2GHz + Cortex A53 4 core 1.4GHz |
Image Processing | Mali-T860 GPU |
SDR | A7 + DSP |
Memory | Air Unit: LPDDR3: 1GB, Ground Station: LPDDR3: 2GB, EMMC: Air / Ground 4GB |
Transmission Distance | FCC 20km CE / SRRC 12km |
Image transmission delay | ≤ 110ms |
Image transmission | 720p@30fps 1080p@30 / 60fps transmission, signal bandwidth 20MHz / 10MHz |
Frequency Band | 2.4GHz |
Receive sensitivity | -99dBm@20MHz BW |
Interference recovery | < 1s |
Ground Station
Screen | 5.46 inch 1080P, 16 million colors, capacitive touch screen |
Audio | Built-in speaker × 1, built-in microphone × 2 |
Remote control | Hall affect gimbals with removable sticks x 2, scroll wheel × 1, bottom button × 6 with backlight, top button × 1 (right) |
Wireless | Bluetooth (disabled) / WIFI / GPS / 2.4G map transmission ground |
Inputs | MicroUSB × 1, Micro SD × 1 (supports maximum 64GB) |
Antenna | 1× Circular (5dBi), detachable
1× omnidirectional (2dBi), detachable built-in Wi-Fi antenna, built-in GPS antenna 1× external GPS antenna interface |
Power | Built-in 4950 mAh Lipo Battery |
Charging | Support micro USB port 5v 2A current charging |
Power consumption | The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, Wi-Fi off, GPS off) |
Size | 217 × 106.5 × 31mm not including external antenna and rocker |
Air Unit
Video-Input | Micro HDMI x 2: Input for external camera video, supports 720P 30fps & 1080P 30/60fps |
Power Input | 2 Pin interface x 1: Recommended supply voltage ~7V: minimum 6V: maximum 12V and avoid sharing BEC with servos, the average power consumption of the single-sided module is less than 4W |
Telemetry | 3 Pin interface x 1:3.3V / 5V level UART interface Mavlink Compatible |
Control Output | 4 Pin interface x 1: Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control) |
USB | Micro USB x 1: for debugging upgrades, support OTG mode |
Antenna | MMCX antenna jack x 2: used for signal transmission and ground communication |
Size | 78.5x30x13mm |
Product contents
Product contents
Documents
Please contact us for more information.
1 review for Handheld Herelink HD Video Transmission and Control System