MHD Battery 22000mAh 6s 10c , New Technology Solid-state Li-ion Battery

Description

The MHD battery 6S 22000mAh solid-state li-ion battery is only 1963g, with 260.6Wh/kg energy density, the continuous discharge rate is 5C, Max. discharge rate is 10C. It also has a long cycle life, over 600 times.

The MHD battery is a Semi Solid state battery series that has a higher discharge current than a Li-ion battery. The discharge interval of each battery cell is from 2.7v to 4.2v. But the discharge rate is about 5 times higher than that of a Li-ion battery.

MHD 6S 22000mAh Semi Solid-State Battery with Superior Energy Density and Endurance

6S 22000mAh solid-state li-ion battery is only 1963g, with 260.6Wh/kg energy density, the continuous discharge rate is 5C, Max. discharge rate is 10C. It also has a long cycle life, over 600 times.

Compared with a Li-ion battery, the MHD Solid-state Li-ion battery has a higher discharge current. The discharge interval of each battery cell is from 2.7v to 4.2v. But the discharge rate is about 5 times higher than that of a Li-ion battery.

Compared with traditional lipo batteries, the MHD Solid-state Li-ion battery has a lightweightand higher energy density. Its energy density increased by 30%-35%, even 20% higher than that of the high-voltage version lipo battery. So the drone endurance time will be increased by 20%-35% by using the MHD Solid-state Li-ion battery.

MHD Semi Solid-State Li-ion Battery for Enhanced UAV and Equipment Performance”

MHD Semi Solid-state battery supports Max.10C discharge and Max. 2C charge, there is no obvious heating during 7C discharge. The recommended discharge rate is 1C-5C to achieve the maximum discharge capacity, charging with a 1C current to improve battery life.

MHD Solid-state Li-ion battery is suitable for most UAVs or other electrical equipment that requires long endurance time: Agriculture drone, Industrial multicopter, and VTOL, Robots, Surface ship, etc.

If you have any questions regarding our products, use the Motionew Contact us page to consult our engineering team.